6002 Report of the physical properties of super-luminous

 

 

Stock Code: 6002
Name Purpose: super luminous paint - produce glow in the dark when, weather, and can be used outdoors.
Characteristics: Very hard (hardness of about 6.5 to 7), almost emery (alumina) as appearance like a needle or knife edge, can be regarded as a broken glass frit, and therefore difficult to penetrate inside the plastic.
Scope: transparent plastic material (such as: PS, PMMA, AS, PC, etc.), and PP, PE, PU, ABS.
Use Ratio: Recommended dosage of 2 to 6% (depending on the thickness of the finished product and the actual requirements of the effect may be)
Chemical Composition: AL2O3.Sr.Eu
Specific Gravity: 3.6@25℃/ diameter: 17um
Heat-resistant temperature: 500 ℃
Irradiation conditions: normal lights -40 min / Fluorescent -20 min / sun -5 minutes
Lighting time: can last eight hours or more (the human eye can see the brightness 0.3mcd / square meter), the loop can be used.
Brightness shine: Condition - A acrylic based only added was 2.5% D65 illumination source 400Lx 20 minutes, the unit: mcd / m2

 

time / thickness	0.6mmt	1.2mmt	2.1mmt	3.1mmt	4.1mmt
After 10 minutes	15	26	40	56	63
After 60 minutes	2	3.6	6	8	9
After 120 minutes	0.86	1.6	2.5	3.7	4.2

 

 

 

 

 

Injection Method: When using plastic to be completely dry, and suggested a small capacity injection machine, due to prolonged detention feeding tube may be black, for example: 3 minutes only emits 50g One time, in the capacity of the machine shall 5kg shot 100 times, shall remain in the feed tube 300 minutes, so long may turn black, it is best not to dwell time of over 30 minutes, it is best to use pure plastic before using the residence time of the test, and the test several times to Jue given operating temperature.
Note: This can not be super-luminous pigment compounds containing heavy metals from mixed one, which does not fit waterborne paints and inks.